Managing heat transfer effectiveness in a Darcy medium with a vertically non-linear stretching surface through the flow of an electrically conductive non-Newtonian nanofluid

Mohammed Alrehili; Mohammed Alrehili

doi:10.3934/math.2024448

AIMS Mathematics

2024, Volume 9, Issue 4: 9195-9210. doi: 10.3934/math.2024448

Previous Article Next Article

Research article Special Issues

Managing heat transfer effectiveness in a Darcy medium with a vertically non-linear stretching surface through the flow of an electrically conductive non-Newtonian nanofluid

Mohammed Alrehili ^,

Department of Mechanical Engineering, Faculty of Engineering, University of Tabuk, Tabuk 71491, Saudi Arabia

Received: 17 January 2024 Revised: 23 February 2024 Accepted: 28 February 2024 Published: 06 March 2024
MSC : 76S05, 76D50, 76A05, 65L10

This study encapsulated the research methodology utilized in the flow behaviors of Williamson nanofluid and analyzed the associated mass heat transfer. The study concentrated on examining the magnetohydrodynamic behavior of nanofluids in the presence of heat generation effects and the inclusion of dissipative energy on a vertical nonlinear stretching surface submerged within a Darcy porous medium. The rationale for including variable viscosity and variable conductivity in this research was to precisely evaluate the mechanisms of heat and mass transfer, particularly with regard to the fluctuations in fluid properties. The objective was to enhance the understanding of how these varying properties impact the overall heat and mass transfer processes. The initial formulation of the phenomenon, initially presented as partial differential equations, was transformed into ordinary differential equations by employing appropriate dimensionless variables. The ultimate streamlined version of the model was then numerically solved utilizing the shooting method. By employing the numerical shooting method, we portrayed nanofluid patterns in velocity, temperature, and concentration fields, alongside essential parameters such as skin friction coefficient, Sherwood number, and Nusselt number. The significant key findings highlighted that both the porous parameter and the magnetic number increasingly affected temperature and concentration distributions. Additionally, increasing the thermophoresis parameter resulted in higher concentration and corresponding temperature levels. Graphical presentation and physical explanations were used for analysis, and the study's outcomes were compared to existing literature, affirming a strong agreement that validated the solutions.
- Williamson nanofluid,
- heat mass transfer,
- porous medium,
- viscous dissipation,
- heat generation
Citation: Mohammed Alrehili. Managing heat transfer effectiveness in a Darcy medium with a vertically non-linear stretching surface through the flow of an electrically conductive non-Newtonian nanofluid[J]. AIMS Mathematics, 2024, 9(4): 9195-9210. doi: 10.3934/math.2024448

Related Papers:

Abstract

This study encapsulated the research methodology utilized in the flow behaviors of Williamson nanofluid and analyzed the associated mass heat transfer. The study concentrated on examining the magnetohydrodynamic behavior of nanofluids in the presence of heat generation effects and the inclusion of dissipative energy on a vertical nonlinear stretching surface submerged within a Darcy porous medium. The rationale for including variable viscosity and variable conductivity in this research was to precisely evaluate the mechanisms of heat and mass transfer, particularly with regard to the fluctuations in fluid properties. The objective was to enhance the understanding of how these varying properties impact the overall heat and mass transfer processes. The initial formulation of the phenomenon, initially presented as partial differential equations, was transformed into ordinary differential equations by employing appropriate dimensionless variables. The ultimate streamlined version of the model was then numerically solved utilizing the shooting method. By employing the numerical shooting method, we portrayed nanofluid patterns in velocity, temperature, and concentration fields, alongside essential parameters such as skin friction coefficient, Sherwood number, and Nusselt number. The significant key findings highlighted that both the porous parameter and the magnetic number increasingly affected temperature and concentration distributions. Additionally, increasing the thermophoresis parameter resulted in higher concentration and corresponding temperature levels. Graphical presentation and physical explanations were used for analysis, and the study's outcomes were compared to existing literature, affirming a strong agreement that validated the solutions.

References

[1]	B. C. Sakiadis, Boundary layer behavior on continuous solid flat surfaces, Am. Inst. Chem. Eng. J., 7 (1961), 26–28. https://doi.org/10.1002/aic.690070108 doi: 10.1002/aic.690070108
[2]	R. Cortell, Viscous flow and heat transfer over a nonlinearly stretching sheet, Appl. Math. Comput., 184 (2007), 864–873. https://doi.org/10.1016/j.amc.2006.06.077 doi: 10.1016/j.amc.2006.06.077
[3]	A. M. Megahed, Variable viscosity and slip velocity effects on the flow and heat transfer of a power-law fluid over a non-linearly stretching surface with heat flux and thermal radiation, Rheol. Acta, 51 (2012), 841–874. https://doi.org/10.1007/s00397-012-0644-8 doi: 10.1007/s00397-012-0644-8
[4]	P. K. Kameswaran, P. Sibanda, M. K. Partha, P. Murthy, Thermophoretic and nonlinear convection in non-Darcy porous medium, ASME J. Heat Mass Tran., 136 (2014), 042601. https://doi.org/10.1115/1.4025902 doi: 10.1115/1.4025902
[5]	A. M. Megahed, Carreau fluid flow due to nonlinearly stretching sheet with thermal radiation, heat flux, and variable conductivity, Appl. Math. Mechan., 40 (2019), 1615–1624. https://doi.org/10.1007/s10483-019-2534-6 doi: 10.1007/s10483-019-2534-6
[6]	G. Rasool, A. Shafiq, M. S. Alqarni, A. Wakif, I. Khan, M. S. Bhutta, Numerical scrutinization of Dar-cy-Forchheimer relation in convective magnetohydrodynamic nanofluid flow bounded by nonlinear stretching surface in the perspective of heat and mass transfer, Micromachines, 12 (2021), 374. https://doi.org/10.3390/mi12040374 doi: 10.3390/mi12040374
[7]	S. M. Abo-Dahab, M. A. Abdelhafez, F. M. Oudina, S. M. Bilal, MHD Casson nanofluid flow over nonlinearly heated porous medium in presence of extending surface effect with suction/injection, Indian J. Phys., 95 (2021), 2703–2717. https://doi.org/10.1007/s12648-020-01923-z doi: 10.1007/s12648-020-01923-z
[8]	K. Vafai, C. L. Tien, Boundary and inertia effects on flow and heat transfer in porous media, Int. J. Heat Mass Tran., 24 (1981), 195–203. https://doi.org/10.1016/0017-9310(81)90027-2 doi: 10.1016/0017-9310(81)90027-2
[9]	P. X. Jiang, Z. P. Ren, Numerical investigation of forced convection heat transfer in porous media using a thermal non-equilibrium model, Int. J. Heat Fluid Fl., 22 (2001), 102–110. https://doi.org/10.1016/S0142-727X(00)00066-7 doi: 10.1016/S0142-727X(00)00066-7
[10]	M. Kothandapani, S. Srinivas, On the influence of wall properties in the MHD peristaltic transport with heat transfer and porous medium, Phys. Lett. A, 372 (2008), 4586–4591. https://doi.org/10.1016/j.physleta.2008.04.050 doi: 10.1016/j.physleta.2008.04.050
[11]	R. A. Mahdi, H. A. Mohammed, K. M. Munisamy, N. H. Saeid, Review of convection heat transfer and fluid flow in porous media with nanofluid, Renew. Sust. Energ. Rev., 41 (2015), 715–734. https://doi.org/10.1016/j.rser.2014.08.040 doi: 10.1016/j.rser.2014.08.040
[12]	W. Abbas, A. M. Megahed, Powell-Eyring fluid flow over a stratified sheet through porous medium with thermal radiation and viscous dissipation, AIMS Math., 6 (2021), 13464–13479. https://doi.org/10.3934/math.2021780 doi: 10.3934/math.2021780
[13]	K. Sharma, L. Kumar, A. Singh, V. K. Joshi, Mixed convection flow over non-Darcy porous stretching/shrinking sheet, Indian J. Chem. Techn., 30 (2023), 746–752. https://doi.org/10.56042/ijct.v30i6.487 doi: 10.56042/ijct.v30i6.487
[14]	K. Sharma, L. Kumar, A. Singh, V. K. Joshi, Dynamics of MHD Casson fluid in non-Darcy porous medium: The impact of thermal radiation, Dufour-Soret, and chemical reaction, Mod. Phys. Lett. B, 2023. https://doi.org/10.1142/S0217984923410075
[15]	S. Choi, J. A. Eastman, Enhancing thermal conductivity of fluid with nanoparticles, developments and applications of non-Newtonian flow, ASME FED, 231 (1995), 99–105. https://www.osti.gov/biblio/196525
[16]	J. Buongiorno, Convective transport in nanofluids, AMSE J. Heat Mass Tran., 128 (2006), 240–250. https://doi.org/10.1115/1.2150834 doi: 10.1115/1.2150834
[17]	M. M. Bhatti, K. Vafai, S. I. Abdelsalam, The role of nanofluids in renewable energy engineering, Nanomaterials, 13 (2023), 2671. https://doi.org/10.3390/nano13192671 doi: 10.3390/nano13192671
[18]	S. I. Abdelsalam, A. Z. Zaher, Biomimetic amelioration of zirconium nanoparticles on a rigid substrate over viscous slime - a physiological approach, Appl. Math. Mech., 44 (2023), 1563–1576. https://doi.org/10.1007/s10483-023-3030-7 doi: 10.1007/s10483-023-3030-7
[19]	S. I. Abdelsalam, A. M. Alsharif, Y. A. Elmaboud, A. I. Abdellateef, Assorted kerosene-based nanofluid across a dual-zone vertical annulus with electroosmosis, Heliyon, 9 (2023), e15916. https://doi.org/10.1016/j.heliyon.2023.e15916 doi: 10.1016/j.heliyon.2023.e15916
[20]	N. A. M. Noor, S. Shafie, M. A. Admon, Slip effects on MHD squeezing flow of Jeffrey nanofluid in horizontal channel with chemical reaction, Mathematics, 9 (2021), 1215. https://doi.org/10.3390/math9111215 doi: 10.3390/math9111215
[21]	N. S. Yousef, A. M. Megahed, N. I. Ghoneim, M. Elsafi, E. Fares, Chemical reaction impact on MHD dissipative Casson-Williamson nanofluid flow over a slippery stretching sheet through porous medium, Alex. Eng. J., 61 (2022), 10161–10170. https://doi.org/10.1016/j.aej.2022.03.032 doi: 10.1016/j.aej.2022.03.032
[22]	M. Alrehili, Development for cooling operations through a model of nanofluid flow with variable heat flux and thermal radiation, Processes, 10 (2023), 2650. https://doi.org/10.3390/pr10122650 doi: 10.3390/pr10122650
[23]	S. Sadighi, H. Afshar, M. Jabbari, H. A. D. Ashtiani, Heat and mass transfer for MHD nanofluid flow on a porous stretching sheet with prescribed boundary conditions, Case Stud. Therm. Eng., 49 (2023), 103345. https://doi.org/10.1016/j.csite.2023.103345 doi: 10.1016/j.csite.2023.103345
[24]	M. Alrehili, Slippery flow of non-Newtonian Maxwell thermal nanofluid past a permeable vertically stretched sheet through a porous medium, Eur. Phys. J. Plus, 138 (2023), 444. https://doi.org/10.1140/epjp/s13360-023-04050-w doi: 10.1140/epjp/s13360-023-04050-w
[25]	M. Alrehili, Improvement for engineering applications through a dissipative Carreau nanofluid fluid flow due to a nonlinearly stretching sheet with thermal radiation, Case Stud. Therm. Eng., 42 (2023), 102768. https://doi.org/10.1016/j.csite.2023.102768 doi: 10.1016/j.csite.2023.102768
[26]	N. Vijay, K. Sharma, Dynamics of stagnation point flow of Maxwell nanofluid with combined heat and mass transfer effects: A numerical investigation, Int. Commun. Heat Mass, 141 (2023), 106545. https://doi.org/10.1016/j.icheatmasstransfer.2022.10 doi: 10.1016/j.icheatmasstransfer.2022.10
[27]	A. M. Megahed, Williamson fluid flow due to a nonlinearly stretching sheet with viscous dissipation and thermal radiation, J. Egypt. Math. Soc., 27 (2019), 12. https://doi.org/10.1186/s42787-019-0016-y doi: 10.1186/s42787-019-0016-y
[28]	A. Abbas, M. B. Jeelani, A. S. Alnahdi, A. Ilyas, MHD Williamson nanofluid fluid flow and heat transfer past a non-linear stretching sheet implanted in a porous medium: Effects of heat generation and viscous dissipation, Processes, 10 (2022), 1221. https://doi.org/10.3390/pr10061221 doi: 10.3390/pr10061221
[29]	A. M. Megahed, Improvement of heat transfer mechanism through a Maxwell fluid flow over a stretching sheet embedded in a porous medium and convectively heated, Math. Comput. Simulat., 187 (2021), 97–109. https://doi.org/10.1016/j.matcom.2021.02.018 doi: 10.1016/j.matcom.2021.02.018
[30]	B. Ali, I. Siddique, I. Khan, B. Masood, S. Hussain, Magnetic dipole and thermal radiation effects on hybrid base micropolar CNTs flow over a stretching sheet: Finite element method approach, Results Phys., 25 (2021), 104145. https://doi.org/10.1016/j.rinp.2021.104145 doi: 10.1016/j.rinp.2021.104145
[31]	B. Ali, A. Shafiq, I. Siddique, Q. Al-Mdallal, F. Jarad, Significance of suction/injection, gravity modulation, thermal radiation, and magnetohydrodynamic on dynamics of micropolar fluid subject to an inclined sheet via finite element approach, Case Stud. Therm. Eng., 28 (2021), 101537. https://doi.org/10.1016/j.csite.2021.101537 doi: 10.1016/j.csite.2021.101537
[32]	B. Ali, C. S. K. Raju, L. Ali, S. Hussain, T. Kamran, G-Jitter impact on magnetohydrodynamic non-Newtonian fluid over an inclined surface: Finite element simulation, Chinese J. Phys., 71 (2021), 479–491. https://doi.org/10.1016/j.cjph.2021.03.020 doi: 10.1016/j.cjph.2021.03.020
[33]	B. Ali, I. Siddique, A. Ahmadian, N. Senu, L. Ali, A. Haider, Significance of Lorentz and Coriolis forces on dynamics of water based silver tiny particles via finite element simulation, Ain Shams Eng. J., 13 (2022), 101572. https://doi.org/10.1016/j.asej.2021.08.014 doi: 10.1016/j.asej.2021.08.014
[34]	S. Kumar, K. Sharma, Mathematical modeling of MHD flow and radiative heat transfer past a moving porous rotating disk with Hall effect, Multidiscip. Model. Ma., 18 (2022), 445–458. https://doi.org/10.1108/MMMS-04-2022-0056 doi: 10.1108/MMMS-04-2022-0056

Reader Comments

Your name:*

Email:*
© 2024 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)