Construction and building materials

2020, Volume 7, Issue 2: 157-159. doi: 10.3934/matersci.2020.2.157

Previous Article Next Article

Editorial

Received: 10 April 2020 Accepted: 10 April 2020 Published: 10 April 2020

Citation: Anrea Di Schino, Marco Corradi. Construction and building materials[J]. AIMS Materials Science, 2020, 7(2): 157-159. doi: 10.3934/matersci.2020.2.157

Related Papers:

[1]	Jandrlić I, Rešković S, Dušan C, et al. (2019) Modeling of stress distribution on the basis of the measured values of strain and temperature changes. AIMS Mater Sci 6: 601-609. doi: 10.3934/matersci.2019.4.601
[2]	Di Schino A (2019) Corrosion behavior of new generation super-ferritic stainless steels. AIMS Mater Sci 6: 646-656.
[3]	Ogawa T, Dannoshita H, Adachi Y (2019) Evaluation of tensile properties of ferrite single-phase low-carbon steel with different initial microstructures. AIMS Mater Sci 6: 798-805. doi: 10.3934/matersci.2019.5.798
[4]	Gutnikov SI, Zhukovskaya ES, Popov SS, et al. Correlation of the chemical composition, structure and mechanical properties of basalt continuous fibers. AIMS Mater Sci 6: 806-820.
[5]	Thorstensen RT (2019) Preventing early age chloride migration into low-carbon concrete. AIMS Mater Sci 6: 1020-1032. doi: 10.3934/matersci.2019.6.1020
[6]	Ahmad M, Beddu S, Hussain S, et al. (2019) Mechanical properties of hot-mix asphalt using waste crumber rubber and phenol formaldehyde polymer. AIMS Mater Sci 6: 1164-1175. doi: 10.3934/matersci.2019.6.1164

Reader Comments

Your name:*

Email:*
© 2020 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)