Citation: Mohamed Filali, Kacim Hadjadj, Lakhdar Hachani, Ahmed Mechraoui, Mohamed El-Amine Slimani, Mounir Sakmeche. An experimental and analytical study of the effect of cold compression on the thermophysical properties of a granular medium[J]. AIMS Materials Science, 2020, 7(1): 116-129. doi: 10.3934/matersci.2020.1.116
[1] |
Al-Arkawazi S, Marie C, Benhabib K, et al. (2017) Modeling the hydrodynamic forces between fluid–granular medium by coupling DEM–CFD. Chem Eng Res Des 117: 439–447. doi: 10.1016/j.cherd.2016.11.002
![]() |
[2] | Deltour P, Barrat JL (1997) Quantitative study of a freely cooling granular medium. J Phys I 7: 137–151. |
[3] | Dominguez A, Bories S, Prat M (2000) Gas cluster growth by solute diffusion in porous media. Experiments and automaton simulation on pore network. Int J Multiphas Flow 26: 1951–1979. |
[4] |
Delenne JY, El Youssoufi MS, Cherblanc F, et al. (2004) Mechanical behaviour and failure of cohesive granular materials. Int J Numer Anal Met 28: 1577–1594. doi: 10.1002/nag.401
![]() |
[5] |
Ketterhagen WR, Curtis JS, Wassgren CR, et al. (2007) Granular segregation in discharging cylindrical hoppers: a discrete element and experimental study. Chem Eng Sci 62: 6423–6439. doi: 10.1016/j.ces.2007.07.052
![]() |
[6] |
Brosh T, Kalman H, Levy A (2011) DEM simulation of particle attrition in dilute-phase pneumatic conveying. Granul Matter 13: 175–181. doi: 10.1007/s10035-010-0201-z
![]() |
[7] |
Lor WB, Chu HS (2000) Effect of interface thermal resistance on heat transfer in a composite medium using the thermal wave model. Int J Heat Mass Tran 43: 653–663. doi: 10.1016/S0017-9310(99)00178-7
![]() |
[8] | Vargas WL, McCarthy JJ (2000) Unsteady heat conduction in granular materials. MRS Proceedings 627: BB3.9. |
[9] | Rickelt S, Sudbrock F, Wirtz S, et al. (2003) Coupled DEM/CFD simulation of heat transfer in a generic grate system agitated by bars. Powder Technol 249: 360–372. |
[10] |
Al-Qureshi HA, Galiotto A, Klein AN (2005) On the mechanics of cold die compaction for powder metallurgy. J Mater Process Tech 166: 135–143. doi: 10.1016/j.jmatprotec.2004.08.009
![]() |
[11] |
Narayan P, Hancock BC (2005) The influence of particle size on the surface roughness of pharmaceutical excipient compacts. Mat Sci Eng A-Struct 407: 226–233. doi: 10.1016/j.msea.2005.06.060
![]() |
[12] |
Tsory T, Ben-Jacob N, Brosh T, et al. (2013) Thermal DEM–CFD modeling and simulation of heat transfer through packed bed. Powder Technol 244: 52–60. doi: 10.1016/j.powtec.2013.04.013
![]() |
[13] |
Fischer KM, McNutt MK, Shure L (1986) Thermal and mechanical constraints on the lithosphere beneath the Marquesas swell. Nature 322: 733–736. doi: 10.1038/322733a0
![]() |
[14] |
Medebber MA, Aissa A, Slimani MEA, et al. (2019) Numerical study of natural convection in vertical cylindrical annular enclosure filled with Cu-water nanofluid under magnetic fields. Defect Diffus Forum 392: 123–137. doi: 10.4028/www.scientific.net/DDF.392.123
![]() |
[15] |
De Ryck A, Condotta R, Lubert M (2003) Interrupted shear of granular media. Eur Phys J E 11: 159–167. doi: 10.1140/epje/i2002-10153-6
![]() |
[16] |
Nakayama A, Kuwahara F (1999) A macroscopic turbulence model for flow in a porous medium. J Fluids Eng 121: 427–433. doi: 10.1115/1.2822227
![]() |
[17] |
Elajrami M, Slimani MEA (2019) Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy. Frattura Integr Strutt 13: 231–241. doi: 10.3221/IGF-ESIS.50.19
![]() |
[18] | Ashby MF, Cebon D (1993) Materials selection in mechanical design. J Phys IV 3: 1–9. |