Citation: Nan Liu, Thomas G. Habetler. Design of a parallel-LC-compensated on-board charger for universal inductive charging in electric vehicles[J]. AIMS Energy, 2016, 4(5): 658-674. doi: 10.3934/energy.2016.5.658
[1] | Liu N, Habetler TG (2015) Design of a Universal Inductive Charger for Multiple Electric Vehicle Models. IEEE T Power Electr 30: 6378-6390. |
[2] | Liu N, Habetler TG, A study of designing a universal inductive charger for Electric Vehicles. Industrial Electronics Society, IECON 2013-39th Annual Conference of the IEEE. IEEE, 2013: 4528-4533. |
[3] | Yilmaz M, Krein PT (2013) Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles. IEEE T Power Electr 28: 2151-2169. doi: 10.1109/TPEL.2012.2212917 |
[4] | Capasso C, Veneri O (2015) Experimental study of a DC charging station for full electric and plug in hybrid vehicles. Appl Energ 152: 131-142. doi: 10.1016/j.apenergy.2015.04.040 |
[5] | Zaheer A, Hao H, Covic GA, et al. (2015) Investigation of Multiple Decoupled Coil Primary Pad Topologies in Lumped IPT Systems for Interoperable Electric Vehicle Charging. IEEE T Power Electr 30: 1937-1955. doi: 10.1109/TPEL.2014.2329693 |
[6] | Veneri O, Ferraro L, Capasso C, et al., Charging infrastructures for EV: Overview of technologies and issues. Electrical Systems for Aircraft, Railway and Ship Propulsion (ESARS), 2012. IEEE, 2012: 1-6. |
[7] | Pantic Z, Lee K, Lukic S, Inductive power transfer by means of multiple frequencies in the magnetic link. 2013 IEEE Energy Conversion Congress and Exposition. IEEE, 2013: 2912-2919. |
[8] | Liu N, Habetler TG, Design of an on-board charger for universal inductive charging in electric vehicles. 2015 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2015: 4544-4549. |
[9] | Keeling NA, Covic GA, Boys JT (2010) A Unity-Power-Factor IPT Pickup for High-Power Applications. IEEE T Ind Electron 57: 744-751. |
[10] | Pantic Z, Lukic SM (2012) Framework and Topology for Active Tuning of Parallel Compensated Receivers in Power Transfer Systems. IEEE T Power Electr 27: 4503-4513. doi: 10.1109/TPEL.2012.2196055 |
[11] | Rui C, Cong Z, Zahid ZU, et al., Analysis and parameters optimization of a contactless IPT system for EV charger. 2014 IEEE Applied Power Electronics Conference and Exposition-APEC 2014. IEEE, 2014: 1654-1661. |
[12] | Deng J, LU F, Li W, et al., ZVS double-side LCC compensated resonant inverter with magnetic integration for electric vehicle wireless charger. 2015 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2015: 1131-1136. |
[13] | Liu N, Habetler TG, Design of a universal inductive charger for electric vehicles. Transportation Electrification Conference and Expo (ITEC), 2014 IEEE. IEEE, 2014: 1-6. |
[14] | Pantic Z, Sanzhong B, Lukic S (2011) ZCS LCC-Compensated Resonant Inverter for Inductive-Power-Transfer Application. IEEE T Ind Electron 58: 3500-3510. doi: 10.1109/TIE.2010.2081954 |
[15] | Si P, Hu AP, Malpas S, et al., Switching Frequency Analysis of Dynamically Detuned ICPT Power Pick-ups. 2006 International Conference on Power System Technology. IEEE, 2006: 1-8. |
[16] | Choi WY, Yang MK, Cho HS (2014) High-Frequency-Link Soft-Switching PWM DC-DC Converter for EV On-Board Battery Chargers. IEEE T Power Electr 29: 4136-4145. doi: 10.1109/TPEL.2013.2288364 |
[17] | Deng J, Li S, Hu S, et al. (2014) Design Methodology of LLC Resonant Converters for Electric Vehicle Battery Chargers. IEEE T Veh Technol 63: 1581-1592. doi: 10.1109/TVT.2013.2287379 |
[18] | Pahlevaninezhad M, Drobnik J, Jain PK, et al. (2012) A Load Adaptive Control Approach for a Zero-Voltage-Switching DC/DC Converter Used for Electric Vehicles. IEEE T Ind Electron 59: 920-933. doi: 10.1109/TIE.2011.2161063 |
[19] | Budhia M, Boys JT, Covic GA, et al. (2013) Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems. IEEE T Ind Electron 60: 318-328. doi: 10.1109/TIE.2011.2179274 |
[20] | Bosshard R, Kolar JW, Muhlethaler J, et al. (2015) Modeling and η-α-Pareto Optimization of Inductive Power Transfer Coils for Electric Vehicles. Emerging and Selected Topics in Power Electronics, IEEE Journal of 3: 50-64. doi: 10.1109/JESTPE.2014.2311302 |
[21] | Zaheer A, Kacprzak D, Covic GA, A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications. 2012 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2012: 283-290. |
[22] | Cheng KWE, Divakar BP, Wu H, et al. (2011) Battery-Management System (BMS) and SOC Development for Electrical Vehicles. IEEE T Veh Technol 60: 76-88. doi: 10.1109/TVT.2010.2089647 |
[23] | Veneri O, Capasso C, Ferraro L, et al., Performance analysis on a power architecture for EV ultra-fast charging stations. Clean Electrical Power (ICCEP), 2013 International Conference on. IEEE, 2013: 183-188. |
[24] | Li S, Bao K, Fu X, et al. (2014) Energy Management and Control of Electric Vehicle Charging Stations. Electr Pow Compo Sys 42: 339-347. doi: 10.1080/15325008.2013.837120 |
[25] | Park SY, Miwa H, Clark BT, et al., A universal battery charging algorithm for Ni-Cd, Ni-MH, SLA, and Li-Ion for wide range voltage in portable applications. 2008 IEEE Power Electronics Specialists Conference. IEEE, 2008: 4689-4694. |
[26] | Hõimoja H, Rufer A, Dziechciaruk G, et al., An ultrafast EV charging station demonstrator. Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2012 International Symposium on. IEEE, 2012: 1390-1395. |
[27] | Vehicle Technologies Program EERE ( 2011) 2011 Nissan Leaf - VIN 0356, Advanced Vehicle Testing - Baseline Testing Results. U.S. Department of Energy. |
[28] | Mishima T, Akamatsu K, Nakaoka M (2013) A High Frequency-Link Secondary-Side Phase-Shifted Full-Range Soft-Switching PWM DC-DC Converter With ZCS Active Rectifier for EV Battery Chargers. IEEE T Power Electr 28: 5758-5773. doi: 10.1109/TPEL.2013.2258040 |
[29] | Aguilar C, Canales F, Arau J, et al. (1997) An integrated battery charger/discharger with power-factor correction. IEEE T Ind Electron 44: 597-603. doi: 10.1109/41.633453 |
[30] | Du Y, Lukic S, Jacobson B, et al., Review of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure. 2011 IEEE Energy Conversion Congress and Exposition. IEEE, 2011: 553-560. |