Research article Topical Sections

Discrete-element model of electrophoretic deposition in systems with small Debye length: effective charge, lubrication force, characteristic scales, and early-stage transport

  • Received: 09 October 2019 Accepted: 19 November 2019 Published: 04 December 2019
  • Electrophoresis was recently proposed as a new method for controlling properties and structure of the interface between cement and steel elements in petroleum and construction industries (Lavrov A et al., 2018). Cement slurries typically contain a wide range of particle sizes (micron to hundred micron), and the particles have small Debye lengths (nanometer). The relative magnitude of different forces acting on particles in such systems was examined. A formulation based on the DLVO theory was used to calculate van der Waals forces and electric repulsion forces between particles. It was shown that the following forces need to be included in a discrete-element model of electrophoretic deposition in this case: viscous drag force, force due to the external electric field, gravity + buoyancy force, lubrication force, van der Waals force, and direct mechanical contact force. The recommended cut-off gaps for van der Waals and lubrication forces are equal to the radius of the larger particle participating in the interaction. An example DEM simulation has revealed that deposition starts with deposing finer particles. Shortly after, larger particles are deposited on the finer substrate. This is due to the larger speed-up time of larger particles. The difference in the speed-up time leads to some size segregation at the early stage of deposition, even though the particle mobility is independent of the particle size. The model enables some insight into the processes that take place during the earlier stages of electrophoretic deposition that are difficult to capture and analyze in laboratory experiments.

    Citation: Alexandre Lavrov. Discrete-element model of electrophoretic deposition in systems with small Debye length: effective charge, lubrication force, characteristic scales, and early-stage transport[J]. AIMS Materials Science, 2019, 6(6): 1213-1226. doi: 10.3934/matersci.2019.6.1213

    Related Papers:

  • Electrophoresis was recently proposed as a new method for controlling properties and structure of the interface between cement and steel elements in petroleum and construction industries (Lavrov A et al., 2018). Cement slurries typically contain a wide range of particle sizes (micron to hundred micron), and the particles have small Debye lengths (nanometer). The relative magnitude of different forces acting on particles in such systems was examined. A formulation based on the DLVO theory was used to calculate van der Waals forces and electric repulsion forces between particles. It was shown that the following forces need to be included in a discrete-element model of electrophoretic deposition in this case: viscous drag force, force due to the external electric field, gravity + buoyancy force, lubrication force, van der Waals force, and direct mechanical contact force. The recommended cut-off gaps for van der Waals and lubrication forces are equal to the radius of the larger particle participating in the interaction. An example DEM simulation has revealed that deposition starts with deposing finer particles. Shortly after, larger particles are deposited on the finer substrate. This is due to the larger speed-up time of larger particles. The difference in the speed-up time leads to some size segregation at the early stage of deposition, even though the particle mobility is independent of the particle size. The model enables some insight into the processes that take place during the earlier stages of electrophoretic deposition that are difficult to capture and analyze in laboratory experiments.


    加载中


    [1] Besra L, Liu M (2007) A review on fundamentals and applications of electrophoretic deposition (EPD). Prog Mater Sci 52: 1-61. doi: 10.1016/j.pmatsci.2006.07.001
    [2] Chávez-Valdez A, Boccaccini AR (2012) Boccaccini, innovations in electrophoretic deposition: alternating current and pulsed direct current methods. Electrochimica Acta 65: 70-89. doi: 10.1016/j.electacta.2012.01.015
    [3] Ferrari B, Moreno R (2010) EPD kinetics: a review. J Eur Ceram Soc 30: 1069-1078. doi: 10.1016/j.jeurceramsoc.2009.08.022
    [4] Zhitomirsky I, Gal-Or L (1997) Electrophoretic deposition of hydroxyapatite. J Mater Sci-Mater M 8: 213-219.
    [5] Lavrov A, Gawel K (2016) Manipulating cement-steel interface by means of electric field: experiment and potential applications. AIMS Materials Science 3: 1199-1207. doi: 10.3934/matersci.2016.3.1199
    [6] Lavrov A, Panduro EAC, Gawel K, et al. (2018) Electrophoresis-induced structural changes at cement-steel interface. AIMS Mater Sci 5:414-421. doi: 10.3934/matersci.2018.3.414
    [7] Nelson EB, Guillot D (2006) Well Cementing, Sugar Land: Schlumberger.
    [8] Lavrov A, Torsæter M (2016) Physics and Mechanics of Primary Well Cementing, 1Eds., New York: Springer.
    [9] Hodne H, Saasen A (2000) The effect of the cement zeta potential and slurry conductivity on the consistency of oil-well cement slurries. Cement Concrete Res 30: 1767-1772. doi: 10.1016/S0008-8846(00)00417-8
    [10] Nachbaur L, Nkinamubanzi PC, Nonat A, et al. (1998) Electrokinetic properties which control the coagulation of silicate cement suspensions during early age hydration. J Colloid Interf Sci 202: 261-268. doi: 10.1006/jcis.1998.5445
    [11] Neubauer CM, Yang M, Jennings HM (1998). Interparticle potential and sedimentation behavior of cement suspensions: effects of admixtures. Adv Cem Based Mater 8: 17-27. doi: 10.1016/S1065-7355(98)00005-4
    [12] Hong CW (1997) New concept for simulating particle packing in colloidal forming processes. J Am Ceram Soc 80: 2517-2524.
    [13] Cordelair J, Greil P (2004) Discrete element modeling of solid formation during electrophoretic deposition. J Mater Sci 39: 1017-1021. doi: 10.1023/B:JMSC.0000012935.48724.7f
    [14] Peng Z, Doroodchi E, Evans G (2010) DEM simulation of aggregation of suspended nanoparticles. Powder Technol 204: 91-102. doi: 10.1016/j.powtec.2010.07.023
    [15] Giera B, Zepeda-Ruiz LA, Pascall AJ, et al. (2015) Mesoscale particle-based model of electrophoresis. J Electrochem Soc 162: D3030-D3035. doi: 10.1149/2.0161511jes
    [16] Giera B, Zepeda-Ruiz LA, Pascall AJ, et al. (2017) Mesoscale particle-based model of electrophoretic deposition. Langmuir 33: 652-661. doi: 10.1021/acs.langmuir.6b04010
    [17] Zhu HP, Zhou ZY, Yang RY, et al. Discrete particle simulation of particulate systems: A review of major applications and findings. Chem Eng Sci 63: 5728-5770.
    [18] Ahmadi G, Smith DH (1998) Particle transport and deposition in a hot-gas cleanup pilot plant. Aerosol Sci Tech 29: 183-205. doi: 10.1080/02786829808965563
    [19] Lavrov A, Panduro EAC, Torsæter M (2017) Synchrotron study of cement hydration: towards computed tomography analysis of interfacial transition zone. Energy Procedia 114: 5109-5117. doi: 10.1016/j.egypro.2017.03.1666
    [20] Yang M, Neubauer CM, Jennings HM (1997) Interparticle potential and sedimentation behavior of cement suspensions: Review and results from paste. Adv Cement Base Mater 5: 1-7.
    [21] Ohshima H (2001) Approximate analytic expression for the electrophoretic mobility of a spherical colloidal particle. J Colloid Interf Sci 239: 587-590. doi: 10.1006/jcis.2001.7608
    [22] Vissers T, Imhof A, Carrique F, et al. (2011) Electrophoresis of concentrated colloidal dispersions in low-polar solvents. J Colloid Interf Sci 361: 443-455. doi: 10.1016/j.jcis.2011.04.113
    [23] Swan JW, Furst EM (2012) A simpler expression for Henry's function describing the electrophoretic mobility of spherical colloids. J Colloid Interf Sci 388: 92-94. doi: 10.1016/j.jcis.2012.08.026
    [24] Dance SL, Maxey MR (2003) Incorporation of lubrication effects into the force-coupling method for particulate two-phase flow. J Comput Phys 189: 212-238. doi: 10.1016/S0021-9991(03)00209-2
    [25] Kim S, Karrila SJ (2005) Microhydrodynamics: principles and selected applications, New York: Dover Publications.
    [26] Cate AT, Nieuwstad CH, Derksen JJ, et al. (2002) Particle imaging velocimetry experiments and lattice-Boltzmann simulations on a single sphere settling under gravity. Phys Fluids 14: 4012-4025. doi: 10.1063/1.1512918
    [27] Lavrov A, Laux H (2007) DEM modeling of particle restitution coefficient vs Stokes number: The role of lubrication force. 6th International Conference on Multiphase Flow (ICMF), 9-13.
    [28] Liang Y, Hilal N, Langston P, et al. (2007) Interaction forces between colloidal particles in liquid: Theory and experiment. Adv Colloid Interfac 134: 151-166.
    [29] Colla TE, dos Santos AP, Levin Y (2012) Equation of state of charged colloidal suspensions and its dependence on the thermodynamic route. J Chem Phys 136: 194103. doi: 10.1063/1.4718367
    [30] Lebovka NI (2014) Aggregation of charged colloidal carticles, In: Müller M, Polyelectrolyte Complexes in the Dispersed and Solid State I: Principles and Theory, Heidelberg: Springer-Verlag Berlin Heidelberg, 57-96.
    [31] Fukada Y, Nagarajan N, Mekky W, et al. (2004) Electrophoretic deposition-mechanisms, myths and materials. J Mater Sci 39: 787-801. doi: 10.1023/B:JMSC.0000012906.70457.df
    [32] De D, Nicholson PS (1999) Role of ionic depletion in deposition during electrophoretic deposition. J Am Ceram Soc 82: 3031-3036.
    [33] Zhang Z, Huang Y, Jiang Z (1994) Electrophoretic deposition forming of SiC-TZP composites in a nonaqueous sol media. J Am Ceram Soc 77: 1946-1949. doi: 10.1111/j.1151-2916.1994.tb07075.x
    [34] Biesheuvel PM, Verweij H (1999) Theory of cast formation in electrophoretic deposition. J Am Ceram Soc 82: 1451-1455.
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3525) PDF downloads(356) Cited by(0)

Article outline

Figures and Tables

Figures(3)  /  Tables(2)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog