Search Advanced

2019 Volume 6, Issue 4

Research article Special Issue
Optimum molar ratio of H2 and H2O to reduce CO2 using Pd/TiO2
Akira Nishimura,  Tadaki Inoue,  Yoshito Sakakibara,  Masafumi Hirota,  Akira Koshio,  Fumio Kokai,  Eric Hu
2019, Volume 6, Issue 4: 464-483. doi: 10.3934/matersci.2019.4.464
Abstract HTML PDF Cited (3) Viewed (5414)
Research article Topical Section
Evolution of activation energy during hot deformation of Al–15% B4C composites containing Sc and Zr
Jian Qin,  Zhan Zhang,  X.-Grant Chen
2019, Volume 6, Issue 4: 484-497. doi: 10.3934/matersci.2019.4.484
Abstract HTML PDF Cited (1) Viewed (5484)
Research article Topical Section
The effect of the surface roughness and ageing characteristics of boehmite on the removal of biological particles from aqueous solution
Leonid A. Kaledin,  Fred Tepper,  Yuly Vesga,  Tatiana G. Kaledin
2019, Volume 6, Issue 4: 498-508. doi: 10.3934/matersci.2019.4.498
Abstract HTML PDF Cited (1) Viewed (4971)
Review Topical Section
Competing interactions in colloidal suspensions
Jean-Louis Bretonnet
2019, Volume 6, Issue 4: 509-548. doi: 10.3934/matersci.2019.4.509
Abstract HTML PDF Cited (14) Viewed (7934)
Research article
Effective thermal properties of a magnetite-polyester composite conformed in the presence of a constant magnetic field
Luis Ángel Lara González,  Gabriel Peña-Rodríguez,  Yaneth Pineda Triana
2019, Volume 6, Issue 4: 549-558. doi: 10.3934/matersci.2019.4.549
Abstract HTML PDF Cited (2) Viewed (4681)
Letter Special Issue
Understanding the influence of graphene and nonclay on the microcracks developed at cryogenic temperature
Vishanth Uppu,  Kunal Mishra,  Libin K. Babu,  Ranji Vaidyanathan
2019, Volume 6, Issue 4: 559-566. doi: 10.3934/matersci.2019.4.559
Abstract HTML PDF Viewed (4392)
Review Special Issue
Surface protection of Mg alloys in automotive applications: A review
Jie Wang,  Xin Pang,  Hamid Jahed
2019, Volume 6, Issue 4: 567-600. doi: 10.3934/matersci.2019.4.567
Abstract HTML PDF Cited (35) Viewed (13378)
Research article Special Issue
Modeling of stress distribution on the basis of the measured values of strain and temperature changes
Ivan Jandrlić,  Stoja Rešković,  Dušan Ćurčija,  Ladislav Lazić,  Tin Brlić
2019, Volume 6, Issue 4: 601-609. doi: 10.3934/matersci.2019.4.601
Abstract HTML PDF Cited (1) Viewed (4817)
Research article Topical Section
Synthesis of easily sinterable ceramic electrolytes based on Bi-doped 8YSZ for IT-SOFC applications
Luca Spiridigliozzi,  Grazia Accardo,  Emilio Audasso,  Barbara Bosio,  Sung Pil Yoon,  Gianfranco Dell’Agli
2019, Volume 6, Issue 4: 610-620. doi: 10.3934/matersci.2019.4.610
Abstract HTML PDF Cited (6) Viewed (5304)
Research article
Optimization of compression moulding parameters of multiwall carbon nanotube/synthetic graphite/epoxy nanocomposites with respect to electrical conductivity
Hendra Suherman,  Irmayani
2019, Volume 6, Issue 4: 621-634. doi: 10.3934/matersci.2019.4.621
Abstract HTML PDF Cited (5) Viewed (4163)
AIMS Materials Science
1.4 3.6
Copyright © AIMS Press