Citation: Hanh C. Nguyen, Shigeru Nagasawa, Kensei Kaneko. Strength estimation of silicon nitride ceramics using a round-notched specimen subjected to shearing-tool indentation[J]. AIMS Materials Science, 2020, 7(5): 518-533. doi: 10.3934/matersci.2020.5.518
[1] | Padture NP (2016) Advanced structural ceramics in aerospace propulsion. Nat Mater 15: 804-809. doi: 10.1038/nmat4687 |
[2] | Dawson DM (1995) Ceramic materials in aerospace, In: Flower MH, High Performance Materials in Aerospace, 1 Ed., New York: Springer Science + Business Media, 182-201. |
[3] | Nguyen CH, Nagasawa S, Kaneko K (2017) Optimizing boundary surface of ceramics die in deep drawing process. Transactions on GIGAKU 4: 1-7. |
[4] | Tirosh J, Altus E, Yifrach Y (1992) A new method for evaluating fracture toughness of brittle materials. Int J Fract 58: 211-222. doi: 10.1007/BF00015616 |
[5] | Iosipescu N (1963) Photoelastic investigations on an accurate procedure of the pure shear testing of materials. Revue de Mecanique Appliquée 8: 147-164. |
[6] | D' Almeida JR, Monteiro S (1999) The Iosipescu test method as a method to evaluate the tensile strength of brittle materials. Polym Test 18: 407-414. doi: 10.1016/S0142-9418(98)00043-9 |
[7] | Pelleg J (2014) Mechanical testing of ceramics, Mechanical Properties of Materials-Solid Mechanics and Its Applications, 1 Ed., New York: Springer Science + Business Media, 1-112. |
[8] | Barnes JA, Kumosa M, Hull D (1987) Theoretical and experimental evaluation of the Iosipescu shear test. Compos Sci Technol 28: 251-268. doi: 10.1016/0266-3538(87)90024-8 |
[9] | Stojcevski F, Hilditch T, Henderson LC (2018) A modern account of Iosipescu testing. Compos Part A-Appl S 107: 545-554. doi: 10.1016/j.compositesa.2018.02.011 |
[10] | Japan Fine Ceramics Corp (2020) Silicon Nitride. Available from: https://www.japan-fc.co.jp/en/products/cate01/cate0101/si3n4.html. |
[11] | Brokken D, Brekelmans WAM, Baaijens FPT (2000) Predicting the shape of blanked products: a finite element approach. J Mater Process Technol 103: 51-56. doi: 10.1016/S0924-0136(00)00418-0 |
[12] | Goijaerts AM, Govaert LE, Baaijens FPT (2001) Evaluation of ductile fracture models for different metals in blanking. J Mater Process Technol 110: 312-323. doi: 10.1016/S0924-0136(00)00892-X |
[13] | Goijaerts AM, Govaert LE, Baaijens FPT (2002) Experimental and numerical investigation on the influence of process speed on the blanking process. J Manuf Sci Eng 124: 416-419. doi: 10.1115/1.1445152 |
[14] | Pusit M, Nagasawa S (2013) Cutting behavior of acrylic thick sheet subjected to squared punch shearing. J Chem Chem En 7: 653-665. |
[15] | Kojima M, Mitsomwang P, Nagasawa S (2016) Effect of cutter tip angle on cutting characteristics of acrylic worksheet subjected to punch/die shearing. AIMS Mater Sci 3: 1728-1747. doi: 10.3934/matersci.2016.4.1728 |
[16] | Zhou Y, Yang W, Hu M, et al. (2016) The typical manners of dynamic crack propagation along the metal/ceramics interfaces: A molecular dynamics study. Comput Mater Sci 112: 27-33. doi: 10.1016/j.commatsci.2015.10.012 |
[17] | Zhou Y, Yang Z, Lu Z (2014) Dynamic crack propagation in copper bicrystals grain boundary by atomistic simulation. Mater Sci Eng A-Struct 599: 116-124. doi: 10.1016/j.msea.2014.01.070 |
[18] | Yang Z, Zhou Y, Wang T, et al. (2014) Crack propagation behaviors at Cu/SiC interface by molecular dynamics simulation. Comput Mater Sci 82: 17-25. doi: 10.1016/j.commatsci.2013.09.029 |
[19] | Kadin Y, Mazaheri M, Zolotarevsky V, et al. (2019) Finite Elements based approaches for the modelling of radial crack formation upon Vickers indentation in silicon nitride ceramics. J Eur Ceram Soc 39: 4011-4022. doi: 10.1016/j.jeurceramsoc.2019.05.058 |
[20] | Zhang L, Zarudi I (2001) Towards a deeper understanding of plastic deformation in mono-crystalline silicon. Int J Mech Sci 43: 1985-1996. doi: 10.1016/S0020-7403(01)00024-8 |
[21] | ASTM International (2015) A standard practice for measuring ultrasonic velocity in materials, STM E494-15. |
[22] | Birgül R (2009) Hilbert transformation of waveforms to determine shear wave velocity in concrete. Cem Concr Res 39: 696-700. doi: 10.1016/j.cemconres.2009.05.003 |
[23] | Strobl S, Lube T, Supancic P, et al. (2017) Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT). J Eur Ceram Soc 37: 5065-5070. doi: 10.1016/j.jeurceramsoc.2017.06.045 |
[24] | Paterson MS, Wong TF (2005) Fracture mechanics, Experimental Rock Deformation-The Brittle Field, 2 Eds., Berlin, Heidelberg: Springer Berlin Heidelberg, 239-246. |
[25] | Kadin Y, Strobl S, Vieillard C, et al. (2017) In-situ observation of crack propagation in silicon nitride ceramics. Procedia Struct Integrity 7: 307-314. doi: 10.1016/j.prostr.2017.11.093 |
[26] | MSC Software Corp (2010) Structural Procedure Library, Marc 2010 volume A: Theory and user information, 154-163. Available from: https://simcompanion.mscsoftware.com/infocenter/index?page=content&id=DOC9450 |
[27] | Krueger R (2004) Virtual crack closure technique: History, approach, and applications. Appl Mech Rev 57: 109-143. doi: 10.1115/1.1595677 |
[28] | Kanda Y, Okada H, Iraha S, et al. (2009) A virtual crack closure-integral method for generalized finite element with drilling and strain degrees of freedoms. J Comput Sci Technol 3: 303-314. doi: 10.1299/jcst.3.303 |
[29] | Kikuchi H, Kalia RK, Nakano A, et al. (2005) Brittle dynamic fracture of crystalline cubic silicon carbide (3C-SiC) via molecular dynamics simulation. J Appl Phys 98: 103524. doi: 10.1063/1.2135896 |
[30] | Ayatollahi MR, Razavi SMJ, Berto F (2018) Crack path stability in brittle fracture under pure mode I loading. Procedia Struct Integrity 13: 735-740. doi: 10.1016/j.prostr.2018.12.122 |
[31] | Smith DJ, Ayatollahi MR, Pavier MJ (2001) The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading. Fatigue Fract Eng M 24: 137-150. doi: 10.1046/j.1460-2695.2001.00377.x |